Core Charge: $0.00
1993-2003 TAAT SATURN VALVE BODY REMANUFACTURED
Remanufactured Saturn TAAT Valve Body Assembly Complete READY TO BOLT ON OUT OF THE BOX! This valve body has the updated SONNAX RE-SLEEVED Pressure Regulator Valve INSTALLED (#95200-05K) that requires a special reaming tool to install and use (done by us), corrects common irreversible issues with valve body wear. This problem is the NUMBER ONE most overlooked issue by other re-builders. Some common indicators of this issue is the filter blow outs, delayed reverse with harsh engagements, no reverse, poor line pressure control. If this valve is not re-sleeved, even after a rebuild, the transmission can exhibit these issues caused by the badly worn valve body casting in the pressure regulator valve bore. The pressure regulator valve is electronically controlled and oscillates continuously in the casting bore, causing excessive wear. This wear will prevent proper stroking of the valve and line pressure will go higher or lower than commanded. The hydraulic integrity of the circuit can be re-established by using the highly wear-resistant Sonnax pressure regulator sleeve 95200-05K with the OE pressure regulator valve.