2010-2018 68RFE 6.7L 4X4 DODGE RAM REMANUFACTURED TRANSMISSION
Shop by Category
2010-2017 Dodge Ram 2500 6.7L 4X4
2010-2017 Dodge Ram 3500 6.7L 4X4
SRT STAGE I 68RFE (VEHICLE CANNOT HAVE TRANS TUNING!)
- Sonnax Smart-Tech Overdrive Clutch Housing Kit:
- Modified housing holds physically larger clutch pack for 20% more clutch capacity
- 2X Thicker steels and double-sided clutches increase steel mass by 28% for unrivaled heat dissipation
- Bolt-on anchor plate eliminates clutch pack flexing and distortion that contribute to heat build-up
- 16% More OD apply area for firmer, more controlled shifts
- Billet Valve Body Channel Plate
- Channel plate which is cut from a solid 1” thick piece of billet aluminum.
- Shallow hydraulic circuits in conjunction with thicker body allows a very rigid alternative to the OEM channel plate which is prone to warpage & cross leaks due to its thin weak design.
- Transmission Spin On Filter Screw, Billet Steel
-
- Billet Steel screw replaces the factory plastic style screw
- Accumulator Cover Plate Kit
- Thicker and stronger than stock, also includes 3 additional mounting holes to prevent plate from coming loose.
- TransGo Hi-Capacity Overdrive pressure plate
- Expands capacity to add two extra clutches.
SRT STAGE II 68RFE
- Heavy Duty Low Roller Sprag:
- Replaces the stock dual plastic cage which is prone to failure on
- Sonnax Smart-Tech Overdrive Clutch Housing Kit:
- Modified housing holds physically larger clutch pack for 20% more clutch capacity
- 2X Thicker steels and double-sided clutches increase steel mass by 28% for unrivaled heat dissipation
- Bolt-on anchor plate eliminates clutch pack flexing and distortion that contribute to heat build-up
- 16% More OD apply area for firmer, more controlled shifts
- Billet Valve Body Channel Plate
- Channel plate which is cut from a solid 1” thick piece of billet aluminum.
- Shallow hydraulic circuits in conjunction with thicker body allows a very rigid alternative to the OEM channel plate which is prone to warpage & cross leaks due to its thin weak design.
- Transmission Spin On Filter Screw, Billet Steel
-
- Billet Steel screw replaces the factory plastic style screw
- Accumulator Cover Plate Kit
- Thicker and stronger than stock, also includes 3 additional mounting holes to prevent plate from coming loose.
- TransGo Hi-Capacity Overdrive Pressure Plate
- Expands capacity to add two extra clutches.
- Sonnax Heavy Duty Input Shaft
- Ultra high-strength steel for exceptional toughness.
- Accumulator Piston Kit
- Dual guided seals to prevent piston-to-bore scuffing.
- TransGo High-pressure Reprogramming Kit
- High-pressure without the side effects
- Prevents harsh triple-disc converter apply
SRT STAGE III 68RFE
- Heavy Duty Low Roller Sprag:
- Replaces the stock dual plastic cage which is prone to failure on
- Sonnax Smart-Tech Overdrive Clutch Housing Kit:
- Modified housing holds physically larger clutch pack for 20% more clutch capacity
- 2X Thicker steels and double-sided clutches increase steel mass by 28% for unrivaled heat dissipation
- Bolt-on anchor plate eliminates clutch pack flexing and distortion that contribute to heat build-up
- 16% More OD apply area for firmer, more controlled shifts
- Billet Valve Body Channel Plate
- Channel plate which is cut from a solid 1” thick piece of billet aluminum.
- Shallow hydraulic circuits in conjunction with thicker body allows a very rigid alternative to the OEM channel plate which is prone to warpage & cross leaks due to its thin weak design.
- Transmission Spin On Filter Screw, Billet Steel
-
- Billet Steel screw replaces the factory plastic style screw
- Accumulator Cover Plate Kit
- Thicker and stronger than stock, also includes 3 additional mounting holes to prevent plate from coming loose.
- TransGo Hi-Capacity Overdrive pressure plate
- Expands capacity to add two extra clutches.
- Sonnax Heavy Duty Input Shaft
- Ultra high-strength steel for exceptional toughness.
- Accumulator Piston Kit
- Dual guided seals to prevent piston-to-bore scuffing.
- TransGo High-pressure Reprogramming Kit
- High-pressure without the side effects
- Prevents harsh triple-disc converter apply
- RevMax billet steel center support and 4th clutch housing.
- Steel material and rigidity prevent steels from wearing down the housing.
- Thicker snap ring groove to prevent blow out.
- Increases clutch surface area by 50%.
Regular Price: $2999.99
Before any upgrades, addons, and/or core charges
2010-2018 68RFE 6.7L 4X4 DODGE RAM REMANUFACTURED TRANSMISSION
Before any upgrades, addons, and/or core charges
Our Process:All of our transmissions are fully remanufactured and are held to the highest and strictest industry standards. What this means to you is the fact you are getting a quality product that meets or exceeds the OEM standards, not just a part that is taken apart and
Updates to the Transmission:
- Updated Sonnax TC Limit Valve
Severe wear of the TC limit valve bore results in loss of converter release oil pressure. Reduced release pressure at low speed and idle will drag the converter lining, causing engine surge, pulsation or stall.
Low release pressure at cruise affects and limits efficiency, often increasing RPM and reducing fuel economy. If release pressure is low enough, the converter lining may drag enough to glaze the lining.
A worn TC limit bore contributes to converter drain back issues. The Sonnax oversized TC limit valve kit 44912-03K restores normal converter charge and cooler flow, correcting converter overheating problems. Installation of this valve requires use of a special reaming fixture and jig that allows this high quality valve and sleeve to be installed. - Sonnax Oversized Solenoid Switch Valve & Plug Kit
Solenoid switch valves and plugs in listed Chrysler transmissions cause bore wear as they oscillate and stroke during operation. This wear allows pressure loss and cross-leakage, and often permits the plugs to cock and hang up in the bore. This can result in fail safe mode, various codes, bind-ups, and burnt overdrive or 4th clutches. In 41 and 42 series units, TCC concerns can result, including engine stalling due to improper lockup. Reconditioning the bore and installing Sonnax oversized solenoid switch valve and plug kit 92835-32K restores vital clearances for renewed operation and control.
Core information: Buyer is required to pay a core deposit UP FRONT in addition to the transmission price. Core must NOT have any hard part, or case damage, otherwise there will be additional charges deducted from your core deposit for the damaged hard part(s) or case. Core Return Freight Shipping is NOT FREE, Customer is responsible for core return shipping cost which will be deducted from your core deposit. Return shipping is the same cost as the original shipping charge(shipping cost covers one way).
Warranty:
This transmission comes with a 1 Year 36,000 Mile Warranty with the purchase of a new torque converter. We offer an extended Warranty 2 Year 50,000 Mile Warranty, or a 3 Year 100,000 Mile Warranty for an additional charge.
WARRANTY DOES NOT COVER ANY OF THE FOLLOWING:
Any and all shipping costs, including freight damage claims. Rental cars, loss of work, any labor costs, removal/reinstall fees, towing costs, inspection fees and any other incidental costs or damages which may be associated with product failure. Any product that has been physically altered, improperly installed or maintained. Any product used in an improper application, abused or not used in connection with the proper parts.
Availability:
Majority of units are in stock, if we do not have one in stock they are quickly available in most case, as little as one day. There are many different version of this transmission model available so please call for additional details.